LinnStrument Frequently Asked Questions
Q: What are the limitations of LinnStrument's sensor technology?
A: 1) Velocity sensing of LinnStrument's pressure pads is very good but inherently less accurate than on a MIDI piano keyboard, for two reasons:
a) Note pads lack the physical momentum of a moving key.
b) Note pads--like drum pads-- sense velocity by tracking the pad's pressure envelope until it starts to fall from its peak, which is inherently less accurate than measuring the time for a piano key to move between two electrical contacts.
2) If 3 note pads are pressed that are 3 corners of a rectangle, presses to a note pad that is the 4th corner of that rectangle will be ignored.
3) No more than 3 note pads are permitted in the same vertical column. Pressing a 4th note pad in the same column will be ignored.
4) Y-axis (forward-backward) movement is limited to the 17 mm vertical dimension of each note pad. Sliding your finger vertically across rows will result in a new note when the touch enters the adjacent row's note pad.
5) Maximum simultaneous touches: about 50, or 15 in MPE mode, due to the maximum 15 per-note MIDI channels.
6) Minimum distance between any 2 touches: mm, but the 2 touches must be in 2 adjacent note pads.
Q: How difficult is it to learn to play?
A: If you play a stringed instrument, it's surprisingly easy to transfer your skills to LinnStrument's stringed-instrument note layout, which is like an 8-stringed bass guitar with each row consisting of consecutive semitones, and with the rows tuned to fourths intervals. This isomorphic layout is both easier to learn and play than a piano keyboard note arrangement, and is much better suited to expressive performance. Here's why. And here's a page showing the location of popular chords and scales.
Q: Where can I try out a LinnStrument?
A: You can see our current dealer list by clicking the Store/Dealers menu -> Dealer List. If your local dealer doesn't have LinnStrument, please ask them to place an order with us, or try it out by buying one on our online store and if you don't like it, send it back within 60 days for a full refund. It's really no problem; we realize that's the only way for many to try it out. Or, email me (Roger) at firstname.lastname@example.org and there's a good chance of a LinnStrument owner in your area who would be willing to show you his.
Q: Can you help me decide between the larger LinnStrument model or the smaller LinnStrument 128 model?
A: In the default fourths tuning and default transposition, LinnStrument 128 has a pitch range of 51 semitones (F#0 to G#4), a little over 4 octaves; and the large LinnStrument model has a pitch range of 60 semitones (F#0 to F5) or 5 octaves. See here for a picture of the pitch locations on both models.
The larger model gives you more flexibility for two-handed and split-keyboard play, as well as more space to continue chords or single lines up into higher registers without switching to other rows. A good analogy is the difference between playing a 24-fret and 15-fret guitar. (The large LinnStrument has 25 columns, like 24 frets plus open string. The LinnStrument 128 has 16 columns, like 15 frets plus open string.) On a 15-fret guitar, you'd probably find it more difficult to perform solos because you'd often need to switch to other strings.
Also, if you're interested in using the Step Sequencer, the sequence view area on LinnStrument 128 shows only 8 steps (columns) of the sequence at a time, compared to 16 steps at a time on the large model.
Also, LinnStrument 128 has no power supply input, which very few people ever use on the large model because nearly everyone uses USB power. If using the round MIDI jacks, you can power LinnStrument from a USB power adapter. And if connecting to an iPad and you don't want to power LinnStrument from the iPad, you can use a USB Y-adapter cable to provide USB power from a USB power adapter while connecting to the iPad for data.
Finally, LinnStrument 128 is more portable and easy to fit into a backpack. And the larger model's folding, padded zippered soft carrying case is thicker than the small model's minimal neoprene sleeve case, which is like a laptop sleeve case.
Q: How does LinnStrument compare to Roli Seaboard?
A: Seaboard is a fine and well-designed instrument. For an unbiased answer, we suggest you search the web for "LinnStrument vs. Seaboard". You will find a number of helpful postings from owners of both instruments.
Q: I live outside of the U.S. If I place an order on your online store, will I be required to play my country's import duties, taxes and brokerage fees?
A: You will be required to pay your country's required sales taxes and import duties before receiving the package from the shipping company. If you're in Canada, you won't be charged import duties because LinnStrument is certified as compatible with NAFTA preference criteria B. If you'd like to learn your country's import duties and taxes for LinnStrument's product category, click here.
Q: What is your warranty?
A: Our warranty is two years if you buy direct from our online store. If you buy from one of our authorized dealers, the warranty is two years if you register your purchase within 60 days of the sale, or one year if you don't.
Q: How difficult is it to get it up and running?
A: Just connect to your computer via USB and play any software instrument on your computer. LinnStrument sends standard MIDI messages, just like with any other MIDI controller keyboard. You can learn more on our Getting Started page, accessed from the LinnStrument Support page.
Q: If I have a problem with my LInnStrument that requires repair, how do you handle it?
A: Contact me (Roger) at email@example.com so I can understand what's wrong. If it does need repair, every problem in LinnStrument can be solved by sending you a part that you can replace yourself in 10 to 30 minutes by following a video, using only a screwdriver. Please don't send it back to us or to the dealer unless I ask you to because the dealer usually doesn't know what to do and will likely take a long time to fix it and return it to you. If you don't speak English, then it's still best to contact me because I can contact the dealer for help in translating. Most importantly, don't worry-- I want to help you.
Q: What's your return policy?
A: We understand that our LinnStrument isn't in stores everywhere, so our 60-day money-back guarantee is our way of letting you try it out at no risk. If you find that LinnStrument doesn't meet your needs, simply send it back (at your expense) within approximately 60 days of receiving it, and we'll refund the entire product cost within two days. To make sure we get it, contact us first so we'll watch for it, and use a low-cost method like UPS or Fedex Ground with tracking and insurance for the product value.
Q: LinnStrument's rows always contain consecutive semitones (chromatic scales). Is it possible to set LinnStrument so that the rows contain consecutive notes of a specific scale, for example only major scale notes while skipping over the accidentals?
A: It is fundamental to LinnStrument’s design that each of the eight rows always contain only chromatic scales. While it is true that some controllers (like our Tempest drum machine) permit you to set consecutive pads to play only scale notes (for example, only major scale notes, skipping accidentals), this is really only useful for controllers with few pads like drum pad controllers or Ableton Push. However, LinnStrument has 200 or 128 note pads so it is not necessary to delete any notes of the chromatic scale. The problem with removing the notes outside of the scale is that you can't play them, so you are limited to very simple music. There are other problems with non-chromatic scales:
1) you must always change the scales to play in different musical modes so you never get a chance to develop any playing skills because the notes are always moving.
2) Pitch slides will no longer be consistent, with larger jumps between note pads that are a whole tone apart than between those that are a semitone apart.
3) Vibratos on a pad with a semitone interval on one side and a whole tone interval on the other will be asymmetrical, bending twice as much on the whole tone side than on the semitone side.
Instead of preventing you from playing accidentals, LinnStrument borrows an idea similar to the piano keyboard's black and white keys: it provides access to all the notes but highlights the naturals. So if you don't want to play the accidentals (sharps and flats), simply play the lit notes and don't play the unlit notes. By default, LinnStrument highlights the natural notes (C, D, E, F, G, A and B) in green lights and highlights all “C” notes in light blue lights, but you can change it to highlight any scale and in any of 10 colors (red, green, blue, cyan, magenta, yellow, white, orange, lime or pink). This is done in Global Settings / Note Lights.
If you feel it is important to remove all accidentals and have LinnStrument's rows consist of only consecutive scale notes, LinnStrumentalist Rick Burnett has created a Mac application and Max/MSP patch that does that, though pitch slides will no longer work correctly.
Q: Can LinnStrument's consecutive note pads be set to play non-standard tunings / non-equal temperament tunings / microtonal tunings / xx-TET tunings?
A: LinnStrument is a MIDI controller, sending standard MIDI messages. MIDI defines note numbers as consecutive semitones. To achieve any non-standard scales, you would simply define the frequency of each MIDI note number however you wish in your external sound generator. As an alternative, you can use MIDI scale translation software such as CSE (http://hpi.zentral.zone/cse) between LinnStrument and your sound generator. Here are a few other helpful things:
1) LinnStrument’s Row Offset setting (the note number interval between rows) can be set to any value between -16 and 16 (by holding the Row Offset > Octave pad). It also permits each row to be independently tuned to any pitch you like. It also has an option called No Overlap. If No Overlap is selected, the starting note number for each row is one higher than the ending note number of the next lower row. For example, if both Row Offset = No Overlap and Split = on, you can set one split’s width to 24 columns, thereby giving you EDO 24 with each row being one octave higher than the one below it.
2) LinnStrument has an RGB LED in every one of the 200 (or 128) note pads. The Note Lights settings permit you to a) turn on or off each of the 12 notes in the chromatic scale in one color, and b) turn on or off each of the 12 notes in the chromatic scale in another accent color. Clearly this isn’t helpful for octaves consisting of other than 12 notes. To workaround this, we allow you to individual set each of the 200 note pads to any of 10 colors or off by sending LinnStrument the following MIDI Control Change commands:
CC20: Column number of note pad to change (control key column is 0, left play column is 1, right play column is 25)
CC21: Row number of note pad to change (bottom row is 0, top is 7)
CC22: Color to change it to (0=as set in Note Lights settings, 1=red, 2=yellow, 3=green, 4=cyan, 5=blue, 6=magenta, 7=off, 8=white, 9= orange, 10=lime and 11=pink).
First send CC20 and CC21 to select the column and row to be lit, then send CC22 to light it.
A user has created a Windows and Mac application that makes the process easy, permitting you to set the color of each note pad in the application's interface, then it sends all of the correct messages to LinnStrument to light the lights. This is described on this page, search for Fuhrman.
3) LinnStrument’s operating software is open-source, so you can customize it however you like.
Q: Which DAWs or synths are MPE-compatible (work with LinnStrument's Channel Per Note and Channel Per Row MIDI modes)?
A: There's a list on our "Recommended Sounds" page, accessed from the LinnStrument Support page.
Q: Are MPE-compatible synths necessary for use with LinnStrument?
A: No, in fact most LinnStrument owners use standard one-channel synths, and one of our main demo videos for LinnStrument doesn't use any MPE sounds at all. Here's why MPE isn't so important:
1) The touch dimension in which polyphony is most useful is pressure, which can be achieved over a single MIDI channel by using MIDI Polyphonic Pressure messages. So the main advantages of MPE are to add polyphonic pitch slides and polyphonic Y-axis, both of which aren't used in most types of music.
2) Most expressive play is solo play, which is monophonic, and LinnStrument provides all 5 types of touch sensing in one-channel mode.
3) LinnStrument's smart MIDI implementation prevents any undesired problems if you perform polyphonic pitch slides or polyphonic Y-axis control. For example, if you play a polyphonic pitch slide in one-channel mode, it transparently quantizes the pitch slides to semitones. And if you play polyphonic Y-axis movements, only the Y-axis movements of the most recent touch are recognized.
Expressive play is mainly useful for playing solos, which are monophonic anyway and therefore don't usually require polyphony. For example, all of Audio Modeling's superb instruments are monophonic and therefore can't use MPE. The main reason to use MPE is if the music you're playing requires polyphonic pitch bends, which is actually fairly rare.
Q: Can LinnStrument be used as a step sequencer?
A: Yes, it has a built-in step sequencer.
Q: Can you add this feature: __________?
A: LinnStrument has a very full feature set, which you can see in the User Manual, accessed from the LinnStrument Support page.
However, the flexible nature of LinnStrument inspires many different people to want to make it into many different instruments. Geert (LinnStrument programmer) and I (Roger) realized early on that:
1) We don’t have the resources to make a LinnStrument that meets everyone’s individual desires,
2) we didn’t want to make it so complex that it scares away non-techy musicians, and
3) we wanted to keep it compact without adding space for an alphanumeric display.
So we intentionally chose parameters that focused on its core purpose as an expressive musical performance instrument and printed them on the panel, and I only printed parameters in the first 16 columns in order to maintain compatibility with LinnStrument 128. And for all of the many different features that individual users desire, we:
1) released the software as open-source, permitting everything to be customized,
2) put in lots of remote MIDI commads so that external computer applications can control nearly everything, and
3) created a User Firmware Mode that allows LinnStrument to act as a smart terminal for external computer applications.
Given that the upper and lower printed panel parameters through column 16 are all used, any new features must be fairly simple and carefully considered to be important to many users for LinnStrument's core purpose as an expressive musical performance instrument.
Q: Why didn't you use a softer, thicker touch surface as on the Continuum or Seaboard?
A: I (Roger) tried a variety of materials and thicknesses. Here is why I finally decided on LinnStrument's 2mm thick, 50% compressible, 40 durometer silicone rubber surface:
1) Adding more thickness spreads out the force of your touch on the sensor below it, making the position sensing less accurate.
2) A thicker and softer touch surface impedes the ability to play fast rhythmic parts (imagine playing a rhythmic clavinet part on a sponge) but making it thinner doesn’t impede playing sounds that use pressure.
3) Softer materials aren’t translucent and therefore can’t let LEDs shine through, as in the ROLI Seaboard and Haken Continuum.
4) Softer silicone rubber then 40 durometer is stickier when you slide left and right.
5) A thicker and softer touch surface makes it more difficult to hold a note in tune because it’s difficult to hold soft rubber in one exact location. A good analogy is the violin, which is very difficult to play in tune, but once you find the note and hold it, it’s very easy to hold that exact pitch because your finger is pressing against a hard surface. The Seaboard works around this problem by offering a beginner mode that reduces the bend range,
Q: Why isn't Open Sound Control implemented?
A: The main reason is lack of customer interest. You certainly can convert the MIDI output to OSC by using a converter utility on your computer. The problem with OSC is that the creators intentionally didn't include any standard messages like MIDI's Note On, Note Off, Pitch Bend, etc., so plug-and-play operation is difficult. The peak of OSC's popularity was in the early iPhone days, when it was the only way to get musical control out of an iPhone. But since Apple implemented MIDI control in iOS, the popularity of OSC has diminished. Note also that because LinnStrument's software is open-source, anyone can write an OSC implementation.
Q: Why don't you make a version of LinnStrument optimized for guitar-style play?
A: Because LinnStrument can be tuned like a guitar, it would seem easy to make a version with a thinner neck optimized for guitar-style play. But much more is required for guitar-style play: a picking surface that feels natural, the ability to bend rows (strings) laterally, the ability to play bar chords and other string-focused fingering techniques, reducing the side margins around the neck to zero, changing the chassis to a something closer to a sculpted neck, and much more. Plus, Y-axis control wouldn't work on the very thin rows required for a guitar-like neck. And even if I (Roger) did all that work, the history of guitar controllers would suggest that it wouldn't be well-received because guitarists--a notoriously conservative lot--would judge if first on whether it can do everything a guitar can do, and only then explore its added possibilities.
Instead, I choose for LinnStrument to be an entirely new instrument, standing on its own merits and unchained from the biases of players of existing acoustic instruments. My view is that the guitar represents the best instrument-design technology that was available a few centuries ago, but that is no longer the case.
Q: I have a great idea for a music product and need to make a prototype but I'm not very technical. Can you do this, or can you give me any advice on how to make a prototype or any companies that I could pay to make a prototype for me? Or how can I present my idea to a music products company so they can pay me a royalty and design/manufacture it for me? How do I patent my idea?
A: Click here.
If you think your LinnStrument has a problem, please first see if the problem and solution appears below. If not, please don't contact your dealer (unless you don't read or write English) because the dealer probably won't know what to do. Instead, please email me directly with a clear description of the problem, your serial number and (preferably) a brief video demonstrating the problem, and I'll do whatever is needed to make your LinnStrument perfect as soon as possible. If I determine that your LinnStrument is faulty and needs repair, there's never a need to send it away because I can send you a replacement part that you can replace yourself in less than 30 minutes by following a video.
Thank you for owning a LinnStrument,
Q: LinnStrument is not sending MIDI. What's wrong?
A: Try the following:
1) Are you using a USB hub? If so, remove it and connect directly to the computer.
2) Is "Global Settings > Actions column > Update OS" on? If so, no MIDI data will be sent and "LinnStrument Serial" will appear in your computer's list of connected devices. (see #6 below.)
3) If you're using USB, make sure that 'Global Settings > MIDI I/O column is set to "USB".
4) Does it work using the MIDI OUT jack? To use this, in Global Settings > MIDI I/O column, select MIDI JACKS.
5) If you're new to LinnStrument, it's possible that you may have accidentally set some settings such that no MIDI is sent. To restore all settings to factory status, perform a Reset: Turn on Global Settings, then in column 16 (Actions), press Notes Off (the lowest button) and Update OS (third button from the bottom) at the same time. You should see "Reset" in large letters.
6) If connecting by USB to a computer, does LinnStrument show up in your computer's system information?
If on mac, click Apple menu > About This Mac, then click System Report. In the System Report window, click Hardware > USB at left. You should see "LinnStrument MIDI".
If on Windows, open Device Manager. You should see "LinnStrument MIDI" in the list of "Sound, Video and Game Controllers".
7) To verify that MIDI messages are arriving at your computer when LinnStrument's surface is played:
If on mac, download and install a mac utility called MIDI Monitor. Be sure "LinnStrument MIDI" appears in the Sources section and is checked, then play LinnStrument's surface. You should see the received MIDI messages in the display area.
If on Windows, download and install a Windows utility called "MIDI OX". Open it and from the Options menu, select MIDI Devices. This will display a new window where you will should the "LinnStrument MIDI" in the MIDI Inputs panel. Click on it to select it and then click on OK. Then play your LinnStrument and you should see MIDI messages in the main area of the MIDI OX windows.
8) If you're using a Mac and have an earlier USB-MIDI Korg driver in your system, it has a bug that prevents LinnStrument from appearing as a MIDI device on your Mac. The solution is to uninstall the current Korg USB-MIDI driver, which you can do by clicking here. Then reboot your computer and see if that fixes it. If so, then install the latest Korg USB-MIDI driver and verify that LinnStrument still works.
9) If you have a MIDI keyboard (either USB output or DIN MIDI output), try connecting it. If it also doesn't work, this suggests something else in your system isn't working or set up properly. For example, you may not have the correct MIDI channel selected in your synth or DAW.
10) Reboot your computer.
Q: LinnStrument will not accept an OS Update from the LinnStrument Updater app. What's wrong?
A: Try the following:
1) Are you using a USB hub? If so, remove it and connect directly to the computer. (USB hubs often don't provide sufficient power.)
2) Is LinnStrument sending MIDI over USB? (See FAQ above.)
3) Is [Global Settings > Actions column > Update OS] turned on?
4) Is LinnStrument showing up in your computer's system information?
If on mac, click Apple menu > About This Mac, then click System Report. In the System Report window, click Hardware > USB at left. You should see "LinnStrument Serial" if [Global Settings > Update OS] is on, or "LinnStrument MIDI" if it is off. (After changing state of Update OS, type Command+R to refresh the window.)
If on Windows 10, open Device Manager. Under the "Port (COM & LPT)" category, you should see "USB Serial Device (COM#)".
5) Try rebooting your computer.
6) Try using a different computer. If you're on Windows, do you have a friend with a mac who would let you try the update from it?
Q: One or two note pads at the top of column 4 or 5 stopped working. What's wrong?
A: Sorry-- this is due to a software bug. To fix it, upgrade your LinnStrument to version 2.2.0 or later, then disconnect and reconnect power. In version 2.1.0, disconnecting and reconnecting power would repair the problem, but the underlying cause of the problem was fixed in version 2.2.0.
Q: There seems to a slight air bubble under the rubber touch surface, causing it to be slightly raised. How do I get rid of this?
A: If LinnStrument's temperature is raised over a short period of time, a air bubble can form under the silicone rubber touch surface. I (Roger) chose not to glue it down to the touch sensor beneath it because in the event of a repair need, users would not be able to replace only the touch surface. All LinnStruments above approximately serial number 800 and all LinnStrument 128 units don't have this issue because I added tiny venting holes to the touch surface (8 on LinnStrument, 6 on LinnStrument 128).
If you have an earlier large LinnStrument model that doesn't have the venting holes and are experiencing this problem, the fix is simple: either let your LinnStrument cool down for a few hours and bubble will disappear, or loosen the panel screws then stretch the silicone sheet slightly as you retighten them. Stretch the rear of the sheet toward the rear and the front of the sheet toward the front. Don't stretch the sheet toward the left and right or it will extend out the sides and not look pretty. Here's how to tighten the panel screws to the correct tightness:
While pressing with one hand on the top panel near the screw, turn the screwdriver clockwise with your other hand until the screw head is level with the top panel. Then tighten an additional 1/4 turn only and no more.
Note that the panel screws can be tightened within a very wide range and still work fine. It they are too tight or too loose, you could experience the problems described in the next FAQ.
Q: When I connect power, all pads are red, or I see "FWUP" in large letters. Help!
Q: There is no Y-axis response in one column or in a few neighboring columns. Help!
A: These are symptoms of one or more of the top panel screws being too loose or too tight. For example, in hot weather the silicone touch surface can expand, causing one of the 8 control buttons at left to stick on. Or if a screw is too loose, it might cause one or more columns of pads near it to stop responding or stop sending Y-axis movement. Here are the specific symptoms and solutions:
* Symptom: when power is connected, either 1) all pads are red, or 2) the touch surface shows "FWUP":
This means that one of the two screws near the Per-Split Settings button (if all pads are red) or Global Settings button (if you see "FWUP") is too tight, causing it to stick on. Loosen both screws 1/4 turn then connect power again to see if it's fixed. If not, loosen another 1/4 turn.
More info: In normal operation, holding Per-Split Settings while connecting power causes LinnStrument to enter Manufacturing Test Mode, in which further presses to the 8 control buttons causes all pads to light in a specific color. And holding Global Settings while connecting power causes LinnStrument to show "FWUP", a special test mode that is an abbreviation for "FirmWare UPdate". But when it's very hot the silicone touch surface can expand, causing one of these buttons to stick on, corrected by loosening the screws a little.
* If the upper or lower pads (or all 8 pads) of one column (or a few adjacent columns) of note pads doesn't respond when touched, or doesn't send Y-axis movements:
The screw above or below that column is too loose. Tighten one or both screws 1/4 turn until the problem stops.
More info: the panel screws not only hold the panel to the chassis but also press the touch sensor's contacts against the circuit board below. If the screws are too loose, no contact will be made on the nearby column of pads.
For either of the above problems, here's how to achieve the correct screw tightness:
Loosen the screw, then while pressing with one hand on the top panel near the screw, turn the screwdriver clockwise with your other hand until the screw head is level with the top panel and you start to feel the increased resistance of the screw being fully seated in the hole. Then tighten an additional 1/4 turn only and no more.
Note that the panel screws can be tightened within a very wide range and still work fine; this is only a problem if a screw is very tight or very loose.
More info: As stated above, the panel screws not only hold the panel down but also press the connections of the touch sensor (including the 8 control buttons) against the circuit board below it. This was a necessary part of the design in order to keep the margins around the playing surface narrow. Had conventional connectors been used, the margin around the playing surface would have been much wider, increasing the total size of LinnStrument. So if a screw is too loose, buttons near that screw may not connect, causing presses or Y-axis movements to be ignored. And if a screw is too tight, a button near it may be stuck on. But as stated above, the panel screws can be tightened within a very wide range and still work fine. A problem only occurs if a screw is very tight or very loose.
Q: While playing three or more notes at once, one of the following sometimes occurs:
1) I hear one note remaining on after release, but the note pad's light turns off.
2) I hear a note that I didn't play.
3) My synthesizer/computer receives random invalid MIDI messages.
This problem occurs regardless of which note pads I play on the playing surface. What's wrong?
A: These are all symptoms of your computer or sound generator being overloaded by the large volume of continuous MIDI messages generated by LinnStrument for its expression data. A standard MIDI keyboard sends only two continuous streams-- Pitch Bend (only when the bend wheel is moved) and Channel Pressure (only when turned on and only when keys are pressed hard). By comparison, LinnStrument's default One Channel mode sends at least 3 streams of continuous data -- Pitch Bend for X-axis movements, CC74 for Y-axis movements and a Poly Pressure stream for each note pad pressed. In typical playing, that's around 6 continuous streams of MIDI messages, which is a lot more than a standard MIDI keyboard. And if you select LinnStrument's Channel Per Note mode, it sends 3 continuous streams (X, Y and Z) for each touch. While relatively new computers, DAWs and sound generators handle this fine, older computers or software and some hardware sound generators may not.
Here are a few solutions to try:
1) Use the MIDI OUT jack instead of USB, because LinnStrument sends USB MIDI data at 3.7 times the rate of the MIDI OUT Jack. Note that you must set 'Global Settings > MIDI I/O' to MIDI JACKS to do this.
2) If using USB output, try reducing the density of sent MIDI messages. Go to this page and search for "USB MIDI Data Reduction".
3) If you're using a USB hub, try connecting directly to the computer's USB port because the hub may be limiting the volume of MIDI data. Also, try all of the computer's USB ports because often some ports may be given higher priority than others.
4) Change 'Per-Split Settings > Loudness/Z' from Poly Pressure to Channel Pressure. This will send only one continuous stream for pressure regardless of how many notes are held.
5) If the sound you're using doesn't use Y-axis data, turn it off. Set 'Per-Split Settings > Timbre/Y > On' to Off.
6) If the sound you're using doesn't use pressure data, turn it off. Set 'Per-Split Settings > Loudness/Z > On' to Off.
7) If the sound you're using doesn't use pitch bend data, turn it off. Set 'Per-Split Settings > Pitch/X > On' to Off.
Q: Sometimes when I press and release one specific note pad on the playing surface and no others, the note (and the pad's light) stays on after release. Further, pressing one of adjacent pads around it will often turn this stuck note (and the pad's light) off. What's wrong?
A: First, try a simple two-minute Calibration of your LinnStrument. Go to the Panel Settings page, Global Settings tab. Then scroll down to the Actions section and read about the "Calibrate" action. Follow the linked video to calibrate your LinnStrument.
If this Calibration doesn't fix the problem, this indicates that the touch sensor in your LinnStrument is physically sticking on at one location, due to one of two causes:
1) The temperature and/or humidity at your location is very high, and either moisture has gotten into the touch sensor, or heat has warped it. Try reducing the temperature and if possible, moving it to a drier location.
2) The touch sensor is faulty and needs replacement. Please email me (Roger) a brief video that demonstrates the problem and I'll send you a new touch sensor that you can install yourself in about 20 minutes by following a video. If within warranty, the sensor will be free. If out of warranty, the sensor will be close to my cost.
Q: If I hold 3 note pads that are 3 corners of a rectangle, presses to the note pad that is the 4th corner of that rectangle are ignored. What's wrong?
Q: I can't play more than 3 notes in one column. What's wrong?
A: These are both fundamental limitations of LinnStrument's touch sensor technology. They are clearly stated on the Specifications page and the FAQ page, both in the Pre-Sales tab and here. Fortunately, LinnStrument's string-like note layout provides multiple locations for each pitch, so if either of these problems occurs when playing a speicific chord fingering, there is always an alternate fingering that doesn't have this problem.
Q: If I hold 3 note pads that are 3 corners of a rectangle, repeated presses to the note pad that is the 4th corner of that rectangle are sometimes ignored or sometimes cause an adjacent note pad to light. And this is not the problem described in the FAQ directly above. What's wrong?
A: Your LinnStrument may need a Calibration of its touch sensor, which you can do yourself in about two minutes. Go to the Panel Settings page, Global Settings tab. Then scroll down to the Actions section and read about the "Calibrate" action. Follow the linked video to calibrate your LinnStrument.
If this doesn't fix the problem, contact me (Roger) and I'll figure out what's wrong.
Q: My USB jack appears to be physically damaged. For example, if I look closely into the jack, I see some bent pins. Or it has come loose inside the chassis. What can I do?
A: Unfortunately the venerable USB jack was originally designed for stationary computer peripherals like printers or modems, and not for musicians. If you pull hard sideways on a USB cable, it can damage LinnStrument's USB jack, especially if playing LinnStrument in the standing position. If your USB jack is damaged, this requires replacement of LinnStrument's main circuit board. Contact me (Roger) and I'll send you a replacement circuit board, which you can replace yourself in about 20 minutes by following a video. Then you will return the faulty circuit board to me within 30 days. I will cover one such repair within the warranty period, or if your warranty has expired I will charge you a low fee that is close to my repair cost.
Even with a broken USB jack, you can probably still play your LinnStrument. If you have the large LinnStrument model, you can use the round MIDI jacks and a power supply. Or if you have LinnStrument 128 (without the power jack) and the USB jack is working for power but not data, you can use the USB jack for power and the round MIDI jacks for data.
In future, damage to the USB jack can be avoided by tying the USB cable around the nearest guitar strap button as a strain relief, as shown at the bottom of the Hooking It Up page. This is a trick that guitarists commonly use to avoid similar damage from pulled guitar cables.
Q: My LinnStrument doesn't sit level on a table, but rather rocks on two opposite corners. How do I fix this?
A: LinnStrument's thin sheet metal chassis can be slightly misaligned during shipping or movement. The solution is simple: place your LinnStrument on a flat surface then press down on the two elevated corners. This won't hurt it.
Q: Occasionally all the note pad lights flash unexpectedly. What's wrong?
A: This indicates that you are powering LinnStrument from an inadequate power source, perhaps an iPad with a non-Apple Lightning adapter or a USB hub that doesn't supply LinnStrument's required 300 mA minimum current. See the Hooking It Up page for more information.
Q: Help! My LinnStrument is dead. No lights are on and it doesn't send any MIDI. How can I fix it?
A: This indicates that you have been powering LinnStrument from an inadequate power source, perhaps an iPad with a non-Apple Lightning adapter or a USB hub that doesn't supply LinnStrument's required 300 mA minimum current. You may have seen its note pad lights flash unexpectedly, an early indication of poor power. In this case, the power has dipped below the required minimum many times during internal writes to flash memory, and eventually LinnStrument was unable to recover.
The solution is simple: connect LinnStrument directly to your computer's USB port and update it to the current OS version, then it will be fine again. It will still accept an OS update in this state. Once you have completed the OS update, you'll also need to Calibrate your LinnStrument. To learn how to do this, open the Panel Settings page, Global Settings tab, then scroll down near the bottom of the page to the "Actions" section.